Specifications

200
Chapter 6: Installing and Removing External Devices
4. If the device is the last SCSI device on the daisy chain, make sure it has a terminator
installed on it.
5. Restart the system and check the System Manager listing or hinv listing again.
The software automatically recognizes any device you install. Use Table 6-4 for more
information on various SCSI external devices.
Table 6-4 Additional Information on External SCSI Devices
Installed device: For Information on: Go to:
Floppy drive Formatting and
ejecting a disk
“Formatting an External Floppy Disk
Drive” on page 201
CD-ROM drive Special instructions for
setting up a CD-ROM
others can access
Additional information
Toolchest> Help >Online Books>EndUser
bookshelf > Personal System Administration
Guide, “Setting Up SCSI Peripherals”
Toolchest>Help>OnlineBooks>EndUser
bookshelf IRIX Admin: Peripheral Devices,
and search for “CD-ROM, Floptical, and
Floppy Disk Drives”
Tape drive Backing up data onto a
tape
Toolchest>Help>OnlineBooks>EndUser
bookshelf > Personal System Administration
Guide > ”Backing Up and Restoring Files”
Printer Setting up a printer Toolchest > System > System Manager >
Hardware and Devices > Printer Manager
For general information, go to Toolchest >
Help > Online Books > End User bookshelf
> Personal System Administration Guide
>“Setting Up Network, Peripheral, and
Printer Connections”