Specifications

198
Chapter 6: Installing and Removing External Devices
Testing the External Device
After you’ve attached the device to your workstation, check to make sure your system
recognizes the device.
The system automatically sets up the system software for most external devices you
install and places an icon on the desktop.
To check the system configuration, follow these steps:
Figure 6-10 Turning On External Devices and the OCTANE Workstation
1. Turn on the external device first. External devices can be turned on in any order.
(Step A)
Tip: Always turn on the external device before turning on the workstation; otherwise,
the system does not recognize the device.
Switch
Power button
Power cord
Power switch
A
B
C
D