Specifications

Powering On the OCTANE Workstation
197
Powering On the OCTANE Workstation
Figure 6-9 Powering On the OCTANE Workstation
1. Plug in the power cord. (Step A)
2. Replace the lockbar (if one was removed).
■ Open the cover on the front of the OCTANE workstation.
■ Slide the lockbar into the lockbar slot.
■ Insert the lock through the lockbar at the back of the workstation.
3. Push the power button on the workstation. (Step B)
4. Press the power switch on the monitor. (Step C)
Power button
Power cord
Power switch
A
B
C