Specifications

Installing External SCSI Devices
191
Preparing the SCSI Device for Cabling
1. Ifyou are daisy-chaining anew deviceto aconnected device,removethe terminator
from the connector on the last device in the current chain by squeezing the clips on
both sides of the terminator and pulling it off. See Figure 6-3.
2. If this is the only device to be attached to the OCTANE workstation, leave its
terminator in place.
If no SCSIdevices are attached to the OCTANE workstation, no terminator is needed on
the workstation’s SCSI port.
Figure 6-3 Removing the Terminator From the Last Device on the Daisy Chain