Specifications

168
Chapter 5: Installing and Removing XIO Graphics and Option Boards
Figure 5-34 Installing the Texture Memory Option Board on the OCTANE/SI Graphics Board
1. Align the texture memory option board above the graphics board as shown in
Figure 5-34.
2. Lower the texture memory option board and slide the front edge under the I/O
panel.
3. Align thetwo long connectorson theunderside of thetexturememory optionboard
with the two connectors on the graphics board.
4. Press on the top of the texture memory option board above the connectors to seat
the connectors.
Note: These connectors must be fully seated for the texture memory board to be
recognized.
Connectors
beneath texture
memory board
UP