Specifications

Installing a Graphics Board, Option Board, or Blank Panel
157
Figure 5-23 Attaching the Option Board Flex Cables to the Graphics Board
1. Turn the XIO module so that the graphics board in slot A or D and A is facing you.
2. Attach the connector with the shortest flex cables to connector A on the graphics
board. Press down on the middle of the connector to ensure proper seating.
3. Lay the middle flex cable through the release levers of connector A, then attach the
connector. Press down on the middle of the connector to seat it.
Graphics board
A
B
C
A
B
C
Release levers
UP