Specifications

156

Chapter 5: Installing and Removing XIO Graphics and Option Boards

5. Remove the caps from all XIO compression connectors. Keep the caps to protect the

compression connector should you ever remove any XIO board.

Note: Be sure all the slots are ﬁlled, with a graphics board, option boards, or blank

panels. The system does not cool properly if any of the slots are empty.

Attaching Flex Cables to the Graphics Board

Itis always best touse the option boardinstallation manual for informationon installing

andremovingoptionboardsbecausemany optionboardshaveslotdependencies.These

instructions provide generic information for attaching ﬂex cables to graphics boards.

If you are installing Go To

An option board (without ﬂex cables) “Installing the XIO Module”.

Option board with ﬂex cables “Attaching Flex Cables to the

Graphics Board”.

Blank panel next to another blank panel “Installing the Bafﬂe”.