Specifications

Removing a Blank Panel With Baffle
153
Removing a Blank Panel With Baffle
Figure 5-21 Removing the Baffle
1. If you are removing a blank panel next to another blank panel, first remove the
baffle.
■ Remove the four screws from the baffle.
■ Lift the baffle off the blank panels and keep it for possible future use.
■ Replace two screws into the blank panel you are not removing
2. Remove the final two screws from the blank panel you are removing.
3. Lift the blank panel from the XIO module.
Go to “Installing a Graphics Board, Option Board, or Blank Panel” to replace a graphics
board, option board, or install a blank panel.
Note: It is best to use your option board installation manual when installing an option
board.
Blank panel
Baffle
Slot B
Slot C
B
C