Specifications

Removing a Graphics Board, Option Board, or Blank Panel With No Baffle
151
Figure 5-19 Removing the Screws From the XIO Board
8. Using the supplied Phillips screwdriver, remove the screws from the graphics
board, option board, or blank panel. Use the list below to determine the number
and type of screws to remove.
Different board types require different numbers and types of screws.
• The OCTANE SI graphics board uses four screws
• The OCTANE/SSI or /MXI graphics board uses six screws
• Option boards with flex cables may use extra-long screws and a spacer
• Option boards (or blank panels) without flex cables use four screws
If you are removing a blank panel next to another blank panel, skip to“Removing a
Blank Panel With Baffle” on page 153.
Screws
Graphics board
UP