Specifications

144
Chapter 5: Installing and Removing XIO Graphics and Option Boards
Figure 5-12 Placing the Cap on the XIO Compression Connector
Caution: Do not touch the gold XIO compression connector.
1. Before you remove a graphics board or option board, place a cap on the XIO
compression connector to prevent accidental damage when removing the board.
For this task... Go to...
Removing the cable guard and flex cables
from the graphics board. (Flex cables are also
attached to an option board).
Step 2 in this section.
Removing the graphics or option board; no
flex cables or cable guard.
Step 8 in this section.
Removing a blank panel with a baffle and
adjacent blank panel.
“Removing a Blank
Panel With Baffle”.
Caution - do not touch