Specifications

134
Chapter 5: Installing and Removing XIO Graphics and Option Boards
Preparing the Workstation to Install or Remove XIO Boards
Figure 5-2 Powering Off the OCTANE Workstation
1. Open the cover and push the power button to power off the OCTANE workstation.
(Step A)
2. Unplug the power cord. (Step B)
3. Power off the monitor by pressing the power switch. (Step C)
4. Wait 5 minutes before removing the XIO module.
Warning: The heat sinks on the XIO boards become very hot. Wait 5 minutes after
powering off the OCTANE workstation before you remove the XIO module. Test
before touching any of the XIO boards.
Power button
Power cord
Power switch
A
B
C