Specifications

96
Chapter 4: Installing and Removing PCI Boards
Identifying a PCI Slot
Figure 4-13 Identifying PCI Slots
PCI physical slots and slots identified in software have the same designation. See
Figure 4-13.
• The top slot is PCI ID #1.
• The middle slot is PCI ID #2.
• The bottom (half-sized) slot is PCI ID #3.
Installing a PCI Board
Ifyou have notalready done so,turn to“Preparingthe Workstation toInstall orRemove
PCI Boards” on page 86 for instructions on powering off the OCTANE workstation
through removing the PCI module. Then return here for instructions on installing a PCI
board.
PCI ID #1
PCI ID #2
PCI ID #3