User`s guide

SGI Gigabit Ethernet Adapter For Windows NT
3-6
The Adapter Driver Software
Chan
g
in
g
Confi
g
uration Parameters
The following adapter parameters are user-configurable:
Link negotiation
Jumbo Frames support
Rx flow control
Tx flow control
Use this procedure to change the adapter settings at any time:
1. Open the Control Panel and double-click on the Network icon.
2. When the Network window opens, select the “Adapters” tab:
3. Select the Gigabit Ethernet Adapter and click on “Properties.”
4. In the Properties window, click on the parameter boxes to disable (uncheck) or enable
(check) the parameter.
5. Click on “OK” to accept the settings.