User`s guide

48
• The cpusetGetProperties() and cpusetFreeProperties()
functions were added to the Cpuset System library. For information,
see chapter 4, "Cpuset System", in the IRIX Admin: Resource
Administration manual and the cpusetGetProperties(3x) and
cpusetFreeProperties(3x) man pages.
• Parts of the IRIX Interactive Desktop were refreshed in IRIX 6.5.14.
Introduced in IRIX 6.5.13
• Improved exit codes for the xfsrestore and xfsdump commands.
• Changed the mkfs command to allow you to specify the size of an
XFS allocation group, as an alternative to specifying the total number
of allocation groups. For information, see the mkfs_xfs man page
and IRIX Admin: Disks and Filesystems.
• Changed the mkfs command to allow you to specify the size of a
stripe unit and the size of a stripe width in bytes or in filesystem
blocks, as an alternative to specifying these values in 512-byte block
units. For information, see the mkfs_xfs man page and IRIX Admin:
Disks and Filesystems.
• Changed the default size of an XFS allocation group; larger
filesystems will result in larger default allocation group sizes.
• The xfsdump and xfsrestore commands will provide the VSN
of the tape that reached its end-of-volume (or the VSN of a new tape
that needs to be mounted) and pass this VSN to the