User`s guide

46
(lmhostid). Any FLEXlm license based on the old non-partitioned
lmhostid value will no longer work and a new license key must be
generated. See the following webpage for additional details:
http://www.sgi.com/support/licensing/.
– Contact the applicable software product vendor and provide the
lmhostid number of the partition to generate a new license key.
For nodelock licenses, provide the lmhostid for all partitions of
the software installed and operating.
– For software licensed by SGI, see the following webpage for more
details: http://www.sgi.com/support/licensing/.
– For e-mail and telephone contact information, see the IRIX 6.5.16
Welcome page and follow the “Bundled software and licenses”
link.
• For IRIX 6.5.15 we added HOTPLUG attach and detach support for
SGI Gigabit Ethernet Network adapters. This feature is supported on
IP35 Origin 3000 series systems only; it is not supported on IP35 0300
systems. For information on this feature, see IRIX Admin: Networking
and Mail.
• The IRIX 6.5.15 release supports the lmparthostids and
lmbasehostid commands.