User guide

Mounting the Chassis to a Rack
007-5837-001 47
4. Dispose of the battery according to local ordinance.
5. Using the correct polarity, insert the new lithium battery in the battery socket.
Note: You will need to run the BIOS setup to restore the configuration settings to the real-time
clock (RTC).
Mounting the Chassis to a Rack
A slide rail kit is bundled with the server and is packed in the same shipping box with the chassis.
Use the following steps to install the chassis in the rack.
1. Remove the inner member from the slides as shown in Figure 4-29.
Figure 4-29 Removing Inner Member from Slides