User guide

40 007-5837-001
4: Chassis Maintenance
7. With the lever open, insert the hard disk drive assembly into the chassis and push in the lever
to lock it into place.
See F in Figure 4-21.
Figure 4-21 Inserting 2.5” HDD Carrier
Installing and Removing a Slimline Optical Drive
Caution: The slimline optical drive is not hot-swappable. Before removing or replacing the drive,
you must first take the server out of service: turn off all peripheral devices connected to the system,
turn off the system by pressing the power button, and unplug the power cord from the system or
wall outlet.
To maintain proper system cooling, a filler panel must be installed if you do not install a device at
this location.