User guide

Installing and Removing Hot-Swap Hard Drives
007-5837-001 39
3. Remove the four screws securing the HDD or drive blank from the HDD carrier.
See C in Figure 4-19.
4. Remove the drive from the HDD carrier.
See D in Figure 4-19.
Figure 4-19 Removing 2.5” HDD from Carrier
5. Install the hard disk drive using the same four screws removed earlier.
See Figure 4-20.
6. Ensure that the connector end of the drive matches the backplane connector.
See E in Figure 4-20.
Figure 4-20 Inserting 2.5” HDD