User guide

30 007-5837-001
4: Chassis Maintenance
Replacing the Power Supply
Caution: The power supply is only hot-swappable if you have a redundant system with two
power supplies installed. If you only have one power supply installed, before removing or
replacing the power supply, you must first take the server out of service and turn off all peripheral
devices connected to the system. Turn off the system by pressing the power button and unplug the
power cord from the system or wall outlet.
This section describes how to replace the power supply.
1. If a filler panel is installed, use the finger hole to remove the filler panel.
See A in Figure 4-5.
Figure 4-5 Removing the Filler Panel