User guide

2 007-5837-001
1: System Overview
System Features and Configuration Options
Table 1-1 summarizes the features and configuration options of an RP2 server.
Table 1-1 System Features and Configuration Options
Feature Description
Motherboard Intel Server Board S2600GZ
Processor support Support for one or two Intel
®
Xeon
®
processors E5-2600 product family with
a Thermal Design Power (TDP) of up to 130 W. A 135-watt CPU is available
with product warranty contingencies.
Memory – 24 DIMM slots, 3 DIMMs per channel, 4 memory channels per processor
– Unbuffered DDR3 (UDIMM), Registered DDR3 (RDIMM), and Load
Reduced DDR3 (LRDIMM)
– Memory DDR3 data transfer rates of 800, 1066, 1333 MT/s, and 1600 MT/s
– DDR3 standard I/O voltage of 1.5V and DDR3 low voltage of 1.35V
Chipset Intel C600-A chipset with support for optional Storage Option Select keys
External I/O connections – Video (back panel + front panel on non-max hard drive SKUs)
– RJ-45 Serial- A Port
– Four RJ-45 Network Interface Connectors supporting 10/100/1000Mb
– USB 2.0 connectors (three on back panel and two on front panel on non-max
hard drive SKUs)
Internal I/O
connectors/headers
– One Type-A USB 2.0 connector
– One DH-10 Serial-B port connector
Optional I/O module
support
The following I/O modules utilize a single proprietary on-board connector. An
installed I/O module can be supported in addition to standard on-board features
and any add-in expansion cards.
– Quad port 1 GbE based on Intel Ethernet Controller I350
– Dual port 10GBase-T Ethernet module based on Intel Ethernet Controller
X540
– Dual SFP+ port 10GbE module based on Intel 82599 10 GbE controller
– Single port FDR speed InfiniBand module with QSFP connector
System fans – Five system fans
– One power supply fan for each installed power supply module