Technical data

Chapter 2: Specifications of the Model 3040 40U Cabinet 5
You can configure the cabinet to meet your data storage needs. Standard cabinet
configurations consist of a combination of these types of trays:
 Controller tray – Contains one or two controllers, one interconnect-battery
canister, and two power-fan canisters.
 Controller-drive tray – Contains drives, redundant cooling fans and power
supplies, and, depending on the model, one or two controllers.
 Drive tray – Contains drives, redundant cooling fans and power supplies, and
one or two environmental services modules (ESMs).
Model 3040 40U
Cabinet
Configurations
The following table lists the limitations when populating your cabinet with DE1600
drive trays.
Table 2 DE6600 Drive Trays That Can Be Installed in the Cabinet
Table 3 DE6600 Drive Trays That Can Be Installed in the Cabinet
NOTE These configurations are based on the standard storage array configurations
that are shipped from the factory. The number of controller trays, controller-drive
trays, and drive trays in a cabinet can be modified at the customer site.
Number of Controller Trays Controller Tray
1 E2612 controller-drive tray or E2624
controller-drive tray
1 E2624 controller-drive tray (duplex configuration)
2 E2612 controller-drive tray (duplex configuration)
1 E5412 controller-drive tray
1 E5424 controller-drive tray
1 E5460 controller-drive tray
1 E5512 controller-drive tray
1 E5524 controller-drive tray
1 E5560 controller-drive tray
Number of Controller Trays Controller Tray
1 (72A PDUs are required if you are installing DE6600
drive trays)
E2660 controller-drive tray