Setup guide

ISS3124-RP2 NAS GUI Startup
007-5922-001 39
Tip: If your internet browser does not connect to the appliance, it is likely because the primary
networking interface is misconfigured. Recheck the procedures you executed in the previous two
subsections. You may be able to fix the configuration by logging in to the console and running the
following command:
nmc:/$ setup appliance init
Preconfigured Storage Pool (Volume)
The appliance is preconfigured with a storage pool or volume, tank0, that is optimized for your
hardware configuration. To view the volume status, log in to the system console and execute the
setup status command:
nmc: /$ setup tank0 status
Use the preconfigured volume to create folders for CIFS or NFS shares or zvols or virtual block
devices for SCSI targets. Refer to the SGI NAS User Guide for further details on managing the
appliance.