Setup guide

ISS3124-RP2 NAS GUI Startup
007-5922-001 37
Figure 3-7 on page 37 shows an example screen with a WEB GUI port selected to 2000 (the
default).
The example screen also shows the primary networking interface and its (configured) settings. At
this point you should be able to ping the appliance from an external host.
Figure 3-7 WEB GUI Protocol and Port Selection Screen Example
Note: During the process of network configuring you can specify the WEB GUI port. The default
is 2000, but you can change it to 2001, 2002 or other ports if they are not being used by other
services. For more info about TCP ports used by the SGI ISS3124-RP2 NAS, see the SGI NAS
User Guide.
At this point the appliance is installed and can be accessed via the appliance’s WEB GUI
“Initial Configuration Wizard”. Figure 3-8 on page 38 shows an example screen pointing the
installer to the Initial Configuration Wizard login.