Setup guide

ISS3124-RP2 NAS GUI Startup
007-5922-001 35
The software key is case sensitive. Make sure to enter the key exactly as specified in the
auto-generated e-mail. The ‘-’ separating groups of key characters needs to be entered as well.
Figure 3-5 Appliance Product Registration Screen Example
Configure the Primary Network Interface
To reconfigure the primary network interface, log in to the system console and execute the setup
appliance init command:
nmc: /$ setup appliance init
Next, you will be prompted to reconfigure the primary network interface. You may opt to choose
DHCP, if your environment supports it, as in Figure 3-6 on page 36. Or, you can set up the
interface statically (you will need to specify the device’s IP address, subnet mask, default gateway,
and DNS server addresses).