Setup guide

ISS3124-RP2 NAS GUI Startup
007-5922-001 33
• End User Name
• Email Address
• Telephone
Your permanent key(s) will be emailed to you. If your purchase was for add-on plug-ins only, open
a Supportfolio case as described earlier and SGI will upload the functionality for the plug-in to
your original base software key(s).
Registering the SGI ISS3124-RP2 NAS Software
Boot the SGI ISS3124-RP2 NAS appliance. After the appliance boots up, review and accept the
SGI NAS software license agreement.
You can display licensing information in NAS Management View (NMV) by selecting the 'About'
link or use the following NAS Management Console (NMC) command:
nmc:/$ show appliance license
This will indicate whether you are using the trial or commercial edition, and how many days are
left in the case of a trial edition.
After obtaining the commercial license, you can register in NMC using the command:
nmc:/$ setup appliance register
Alternately, you can click on the 'Register' link at the top of the page in NMV. In NMV a form
similar to the following will appear, where you can enter the new license key:
Figure 3-3 SGI NAS Registration Panel Example