Setup guide

18 007-5922-001
2: ISS3124-RP2 Server and IS2224 JBOD NAS System Hardware Installation
Position the IS2224 Mounting Rails
Position the mounting rails in the rack using the following steps, see Figure 2-7 as a reference.
(1) Mounting Rail
(2) Existing Storage Enclosure
(3) Clearance Above and Below the Existing Enclosure
(4) Screws for Securing the Mounting Rail to the Rack rails (Front and Rear)
(5) SGI D-Rack front panel or Industry Standard Cabinet
Figure 2-7 Position the Mounting Rails in the Rack
Tip: If you are installing the mounting rails above an existing storage enclosure, position the
mounting rails directly above the storage enclosure. If you are installing the mounting rails below
an existing storage enclosure, allow 8.8-cm (3.5-in.) vertical clearance for a storage enclosure.