Setup guide

64 007-5923-001
3: ISS3112-RP2 NAS Operation and GUI Startup
Figure 3-7 WEB GUI Protocol and Port Selection Screen Example
Note: During the process of network configuring you can specify the WEB GUI port. The default
is 2000, but you can change it to 2001, 2002 or other ports if they are not being used by other
services. For more info about TCP ports used by the SGI ISS3112-RP2 NAS, see the SGI NAS
User Guide.
At this point the appliance is installed and can be accessed via the appliance’s WEB GUI
“Initial Configuration Wizard”. Figure 3-8 on page 65 shows an example screen pointing the
installer to the Initial Configuration Wizard login.