Setup guide

60 007-5923-001
3: ISS3112-RP2 NAS Operation and GUI Startup
Registering the SGI ISS3112-RP2 NAS Software
Boot the SGI ISS3112-RP2 NAS appliance. After the appliance boots up, review and accept the
SGI NAS software license agreement.
You can display licensing information in NAS Management View (NMV) by selecting the 'About'
link or use the following NAS Management Console (NMC) command:
nmc:/$ show appliance license
This will indicate whether you are using the trial or commercial edition, and how many days are
left in the case of a trial edition.
After obtaining the commercial license, you can register in NMC using the command:
nmc:/$ setup appliance register
Alternately, you can click on the 'Register' link at the top of the page in NMV. In NMV a form
similar to the following will appear, where you can enter the new license key:
Figure 3-3 SGI NAS Registration Panel Example
SGI NAS licenses are based on raw disk drive capacity and log, cache and spare devices are
excluded from the calculation.
Follow the instructions on the appliance’s NAS management console (NMC) screen to register the
appliance software.
Note: The screenshots in this document are examples and may show different configuration
information than what you see. Ensure you enter the product registration key exactly as it appears
in the email sent when you register.