Setup guide

Install the Chassis Into the Rack
007-5923-001 33
Figure 2-15 Return Latch to Home Position
Install the Chassis Into the Rack
1. Using two people, line up the inner rails on the chassis with the outer rails in the rack. Slide
the chassis into the rack.
2. Motion into the rack will stop, by design, when the first set of safety latches on the inner rails
catch in position on the outer rails. Move the safety latches to the unlatched position and
continue to place the chassis into the rack.
3. Test the motion of the chassis in the rack by moving it forward and backwards in the rack,
see the next subsection. It should only require one person to roll the chassis forwards or
backwards. The chassis should catch and latch at 20 inches (51 cm) out from either side of
the rack.
sgi