Setup guide

007-5923-001 xv
Figures
Figure 1-1 SGI ISS3112-RP2 NAS Enclosure Example (Top View) . . . . . 2
Figure 1-2 ISS3112-RP2 NAS Server Front View Example . . . . . . . 3
Figure 1-3 ISS3112-RP2 NAS Server Rear Components Example . . . . . . 3
Figure 1-4 SGI MIS JBOD Enclosure Front View Example . . . . . . . 4
Figure 1-5 MIS NAS JBOD Control Panel Buttons, Icons and LEDs . . . . . 5
Figure 1-6 IS2224 JBOD Storage Enclosure Example (Front View) . . . . . 7
Figure 1-7 IS2224 JBOD Enclosure Front Status Panel . . . . . . . . . 8
Figure 1-8 IS2224 JBOD Storage Enclosure Example (Rear View) . . . . . 9
Figure 2-1 Slide/Rail Equipment Usage Caution . . . . . . . . . . 13
Figure 2-2 Attaching ISS3112-RP2 Rail Slides to the Rack. . . . . . . . 16
Figure 2-3 Extending ISS3112-RP2 Rail Slides Example . . . . . . . . 17
Figure 2-4 Attaching Chassis to Rail Slides . . . . . . . . . . . . 18
Figure 2-5 ISS3112-RP2 Server Chassis Rail Slide Release Tab Example . . . . 19
Figure 2-6 D-Rack Stiffener Example . . . . . . . . . . . . . 23
Figure 2-7 Alignment with the D-Rack Stiffener Vertical Bolt . . . . . . . 24
Figure 2-8 Rolling Rails Example . . . . . . . . . . . . . . 25
Figure 2-9 Adjustment Using the Alignment Tool . . . . . . . . . . 27
Figure 2-10 Slide the Alignment Tool from Front to Back . . . . . . . . 28
Figure 2-11 Air Duct Above Outer Rail . . . . . . . . . . . . . 29
Figure 2-12 Align Rails to Front . . . . . . . . . . . . . . . 30
Figure 2-13 Support Tabs . . . . . . . . . . . . . . . . . 31
Figure 2-14 Lock on to Support Tabs . . . . . . . . . . . . . . 32
Figure 2-15 Return Latch to Home Position . . . . . . . . . . . . 33
Figure 2-16 Chassis Cover Removal Example . . . . . . . . . . . 35
Figure 2-17 NAS JBOD Chassis and Drive Label Location Example . . . . . 36
Figure 2-18 Example StorBrick Module with Drive in Carrier . . . . . . . 37
Figure 2-19 Drive Installation in StorBrick Module Example . . . . . . . 38
Figure 2-20 Cable Guide – Single Server with One MIS JBOD . . . . . . . 39