User`s guide

Advanced Setup Configurations
007-5653-001 61
IDE and SATA Configuration
When this submenu is selected, the AMI BIOS automatically detects the presence of the IDE
devices and displays the following items:
SATA#1 Configuration
Configure SATA#1 as
Selects the drive type for SATA#1. The options:
•IDE
• RAID (Intel) - Enables configuration of the Intel SATA RAID settings.
• RAID (Adaptec) - Enables configuration of the Adaptec SATA RAID settings.
• AHCI - Enable the SATA Advanced Host Interface. This feature is for advanced
programmers only.
IDE Detect Timeout (sec)
Use this feature to set the time-out value for the BIOS to detect the ATA, ATAPI devices installed
in the system. The options are 0 (sec), 5, 10, 15, 20, 25, 30, and 35.