User`s guide

Check the Node Board Setup
007-5653-001 21
Check the Node Board Setup
Use the following sections to open the top cover and check that each node board is properly
installed and all the connections have been made.
Removing the Chassis Cover
1. Unplug the chassis from any power source.
2. Remove the screws securing the cover to the chassis, shown in Figure 3-6.
3. Lift the top cover from the chassis.
Warning: Except for short periods of time, do NOT operate the server without the cover
in place. The chassis cover must be in place to allow proper airflow and prevent overheating.
!