User`s guide

18 007-5653-001
3: Installing the ISS3500 System in a Rack
the ends of the 2U quick attach rails. Figure 3-2 shows the rail adapter and the end of the quick
attach rail.
Figure 3-2 Square-to-round Hole Adapter for 2U Quick Attach Rails
Figure 3-3 shows the adapter clipped onto the rail set. Use the flat head M5 screws supplied with
the rails kit to bolt the rails set into the rack.
Figure 3-3 Square-to-round Hole Adapter Clipped onto the Rail Set
Install the Outer Rails to the Rack
1. Using the screws provided, secure the back end of the outer rail to the rack (see Figure 3-1).
2. Press the button where the two outer rails are joined to retract the smaller outer rail.
3. Hang the hooks of the rails onto the rack holes and, if desired, use screws to secure the front
of the outer rail onto the rack.
4. Repeat steps 1-3 for the remaining outer rail.