Specifications

Storage Subsystem Guide 23
Managing the Storage Subsystem
Note:SometaskswillreportaPercentageCompletebutnotaTimeRe‐
maining.Inthiscase,TimeRemainingwillbeshownasNotKnown.
Reviewing Events
Logged
TheSMUmonitorsevents,suchasfailureconditions,loggedbytheRAID
rack.TheSMUisconnectedtothestoragesubsystemthroughan“out‐of‐
band”Ethernetlink(theprivatemanagementnetworkistypicallyusedfor
thispurpose).Severeeventsareimmediatelyforwardedtotheserver’sevent
log.Thiswilltrigger
alertnotifications(forexample,emailorSNMPtraps)if
theserverisconfiguredtodoso.Inaddition,iftheSMUisunabletoconnect
totheRAIDracks,aseverealertwillbetriggeredontheserver.
TorevieweventsloggedbytheRAIDrack:
1. NavigatetotheRAIDRack
Detailspage(Home>StorageManagement
>RAIDRacks).
ClickthedetailsbuttoncorrespondingtotheRAIDrackonwhichtoview
theRAIDRackDetailspage.
2. Displaytheeventlog.
FromtheRAIDRackDetailspage,clickEventLog.
Theeventlogisupdatedeverythreeminutesorwhena
severeevent
occursontheRAIDrack.Itdisplaysamaximumof1,000events(infoor