User`s guide

SGI
®
10-Gigabit Ethernet PCI Express Network Adapter User’s Guide
2. To change the MTU size of the 10-Gbit Ethernet adapter, enter the following,
where N is the number of the adapter:
[root@linux root]# ifconfig ethN mtu mtu_size
For example:
[root@linux root]# ifconfig eth2 mtu 1500
3. To verify that the MTU size has been changed, enter the following:
[root@linux root]# netstat -i
For example:
[root@linux root]# netstat -i
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
... other interfaces removed from output
eth2 1500 053042986 0 0 073338167 0 0 0 BMRU
Troubleshooting
For information about troubleshooting, see:
http://www.myri.com/scs/READMES/README.myri10ge-linux
007–4983–002 11