User`s guide

About this Guide

Scope of this Guide

This guide is written to facilitate installation of the adapter and does not cover

detailed points of network conﬁguration. It contains the following chapters:

• Chapter 1, "Features and Capabilities", summarizes features, cabling, conﬁguration

limits, and tools.

• Chapter 2, "Connecting the Adapter to a Network", shows you how to connect the

adapter to your network.

• Chapter 3, "Operating the Adapter", explains how to verify installation of the

adapter and software, how to reset the adapter, and how to set conﬁguration

parameters.

• Chapter 4, "Performance Tuning", discusses performance tuning topics.

Related Publications

This guide is part of a document set that fully supports the installation, operation,

and service of the adapter. For more information about installing and servicing the

adapter, see the user’s guide for the system in which the adapter is installed.

Also see the following:

• Linux Conﬁguration and Operations Guide

• The Network Administrators’ Guide

• The following Myricom webpages:

– Myri-10G 10-Gigabit Ethernet Solutions:

http://www.myri.com/Myri-10G/10gbe_solutions.html

– README - Myricom 10GbE driver for Linux:

http://www.myri.com/scs/READMES/README.myri10ge-linux

– Myri-10G PCI-Express NIC with a 10GBase-R port:

http://www.myri.com/Myri-10G/NIC/10G-PCIE-8A-R.html

xvi 007–4983–002