Specifications

SCPI Command Operation SG Series Programming

6-24 M550129-03 Rev G

Command Description

SCPI

:TERM

<NRf>

Sets the return string terminators to be used by the device. Factory

set to 3. The valid range is 1-4. Values indicate the following

terminator(s):

1 = 0x0d only (CR), 2 = 0x0a only (LF), 3 = 0x0d 0x0a (CR LF), 4 =

0x0a 0x0d (LF CR)

:TERM?

Returns the string terminators to be used by the device.

:VERsion?

Returns a numeric value corresponding to the SCPI version number

for which the instrument complies. The response is in the format

YYYY.V where the Y’s represent the year and V represents the

approved version number for that year (e.g., 1995.0)

Table 6-5. System Fault Registers

Bit Position Bit Weight Fault1–8 Fault9–16 Fault17–24 Fault25–31

7 128 Channel 1 not used not used not used

6 64 not used not used not used not used

5 32 not used not used not used not used

4 16 not used not used not used not used

3 8 not used not used not used not used

2 4 not used not used not used not used

1 2 not used not used not used not used

0 1 not used not used not used not used

The SYStem:FAULt? query returns 4 numeric values separated by commas.

Each value is the decimal equivalent of the total bit weights for that System Fault