Specifications

SG Series Programming Ethernet Features, Functions and Specifications
M550129-03 Rev G 4-3
4.2.2 Programmable Functions
• Output voltage and current
• Soft limits for voltage and current
• Overvoltage protection
• Output enable/disable
• Maskable fault interrupt
• Hold and trigger
• External relay control
• Full calibration
4.2.3 Readback Functions
• Measured voltage and current
• Voltage and current settings
• Soft voltage and current limits
• Overvoltage protection setting
• Status and Accumulated Status registers
• Programming error codes
• Fault codes
• Manufacturer, power supply model, and firmware version identification
4.3 SPECIFICATIONS
(SUBJECT TO CHANGE WITHOUT NOTICE)
4.3.1 Ethernet/LAN Configuration
• Ethernet: IEEE-802.3 compliant
• Medium: 10/100 base-T
• Connection Monitoring: Media Sense supported
• Protocol: TCP/IP, IPV4
• ICMP (ping server): Enable (default)/Disable
• IP Address Assignment: Automatic via DHCP (Primary default), Static,
or Automatic Private IP Addressing (Auto-IP, Secondary default)
• VXI-11 Discovery: Supported
• Security: Password protected access, and selective permissions for
each user