Specifications
Ethernet Features, Functions and Specifications SG Series Programming
4-2 M550129-03 Rev G
INTERNET OR LAN CONNECTION
To operate your Sorensen Ethernet product connected to the Internet or a
LAN you will need:
• Pentium-based laptop or desktop computer running Microsoft Windows
XP (or better)
• Ethernet based Network Interface Card (NIC) or built-in port capable of
10/100 MBit operation
• Appropriate Ethernet modem for Internet connection, or
• Switch or hub (Linksys brand strongly recommended) for LAN
connection
• Standard CAT 5 Ethernet interconnect cable
• Microsoft Internet Explorer version 6.0 or later
• Sun Microsystems Java Runtime Environment
4.2 FEATURES AND FUNCTIONS
4.2.1 Features
• Ethernet/LAN connectivity, 10/100base-T compatible
• Fully
™ (LAN eXtensions for Instrumentation) class C compliant
• Built-in Web Server for direct control using Internet Explorer 6.0 or
higher
• 16-bit programming and 16-bit readback of voltage and current
• Programmable overvoltage protection with reset
• SCPI compliant command set
• User-programmable signals including Local/Remote Sense relay drive,
External Polarity relay drive, and Disconnect (Isolate) Relay Drive
• User selectable Constant-Voltage/Constant-Current or Foldback mode,
with reset
• Voltage Ramp and Current Ramp functions
• Field-upgradeable firmware via RS232
• Full calibration through software control
• Rear panel Ethernet/IEEE-802.3 and RS232 control interface
• Rear panel External User Control Signal Interface
(Includes optically isolated external hardware trigger input)
• Rear panel configuration switch