Specifications

M550129-03 Rev G
Index-1
INDEX
A
Accuracy
programming, Ethernet, 4-4
readback, Ethernet, 4-5
Analog Program Adjustment, 7-11
atures and Functions
Ethernet, 4-2
C
CALibrate, 6-27
Calibration
Current Measurement/Readback
Calibration, 7-9
Setup for Calibration, 7-2
Voltage Programming Calibration, 7-3
Warning, 7-1
Calibration Procedrues
Current Programming Gain/Offset and
Measurement Readback, Ethernet,
GPIB, 7-9
Introduction, 7-1
Voltage Programming, Ethernet, 7-3
Calibration Procedures, 7-1
Analog Program Adjustment, 7-11
Current Programming, Ethernet, 7-7
Setup, 7-2
Voltage Program Gain/Offset and
Measurement Readback, Ethernet,
GPIB, 7-5
CALIBRATION SCPI Command Reference,
6-29
CalibrationProcedrues
Overvoltage Protection Programming
Calibration, Ethernet, GPIB, 7-6
Configuration
Ethernet/Lan, 4-3
RS232 Setup Procedure, 3-3
Setup Procedure, Ethernet, 5-3
Configurations
IEEE 488.2 GPIB Setup Procedures, 3-4
Setup Procedure, DHCP, 5-4
Conventions
[ ], 6-9
E
Error/Event Queue, 6-5
SCPI Error Codes, 6-5
Ethernet Web Pages, Overview, 5-14
Examples, Using SCPI Commands, 6-41
Hardware Trigger, 6-43
OVP Setup, 6-42
Power On INIT, 6-45
Ramp I, 6-44
Ramp V, 6-44
Ramp V, 2, 6-45
Sequences, 6-46
Trigger, 6-43
VI Mode, 6-41
External User Control Signal Connector
FAULT output signal, 5-11
FOLDBACK output signal, 5-11