Installation guide

6
4. Click the Enable Dead Keys option button to enable non-English
keyboard characters such as umlauts. Click Next to continue.
5. Use the arrow keys to select the mouse type for your system. Click
Next to continue.
Note: Standard Silicon Graphics 230 visual workstation users
should select the (3 Button Mouse (PS/2)) mouse configuration.
6. Click Next in the Red Hat 6.2 Linux System Installer window to
continue. The Install Type window shown in Figure 1 appears.
7. Select the installation type, as explained in the following section.
Selecting the Installation Type
To select the installation type, follow these steps:
1. Click the Install and GNOME workstation option buttons (if not
already selected by default) in the Install Type window shown in
Figure 1. Click Next to continue.
Note: Click Initialize to format the workstation drive if the
following message appears:
The partition table on device hda is corrupted. To
create new partitions it must be initialized,
causing the loss of ALL DATA on this drive.
L3Con_Install.fm Page 6 Tuesday, February 27, 2001 8:01 AM