Installation guide

3. Insert the Red Hat Linux 6.2 CD-ROM into the workstation drive

bay.

4. Using the arrow keys, select CD-ROM from the Boot menu.

5. Press the Enter key to bring up the Red Hat menu.

6. At the boot prompt, press the Enter key to boot the workstation

from CD-ROM.

7. Press the Enter key when the Welcome to Red Hat Linux 6.2

screen displays.

8. Conﬁgure the keyboard and the mouse as explained in the next

section.

Conﬁguring the Keyboard and Mouse

To conﬁgure the keyboard and the mouse, follow these steps:

1. Select a language for your system by using the up and down arrow

keys. Press Next to continue.

2. Use your arrow keys to select the keyboard conﬁguration for your

system.

Note: Standard Silicon Graphics 230 visual workstation users

should select the Generic 101-Key PC keyboard conﬁguration.

3. Click the keyboard layout option button that matches your system.

L3Con_Install.fm Page 5 Tuesday, February 27, 2001 8:01 AM