Installation guide

Conﬁguring the Account

To conﬁgure the account, follow these steps:

1. Use the scroll bar to locate your time zone in the available list. Click

Next to continue.

Note: You may also use your mouse to double-click an area on the

map that corresponds to your time zone.

2. Type the root password, conﬁgure your account, and then click

Add.

3. Create and conﬁgure each additional user account. Click Add when

you complete each account.

4. Click Next to continue, which brings up the ﬁrst X Conﬁguration

windows.

5. Select the X conﬁguration settings, as explained in the next section.

Selecting the X Conﬁguration Settings

To select the X conﬁguration settings, follow these steps:

Note: The settings suggested in this section are typically used to

conﬁgure the operating system to operate with a standard

Silicon Graphics 230 visual workstation and SGI monitor; your

L3Con_Install.fm Page 15 Tuesday, February 27, 2001 8:01 AM