User`s guide

26 007-5472-001
A: Specifications
Table A-4 summarizes the LEDs and connector specifications for the copper board.
Fiber-Optic Board Technical Specifications
Table A-5 provides the general technical specifications for the fiber-optic board.
.
MTBF: 213 (Years)
*According to Telcordia SR-332 Issue 1
Environmental condition ? GB (Ground, Fixed, Controlled).
Ambient temperature - 25˚C. Temperature rise of 10˚C above
the system ambient temperature was assumed for the cards
components.
Table A-4 Copper Bord LEDs / Connector Specifications
Characteristic Value
LEDs: (3) LEDs per port
Link Activity: Turns on any link speed, blinks on activity
(green).
100Mbits/s: Turns on 100 Mbit/s link (green).
1000Mbit/s: Turn on 1000 Mbit/s link (green).
LEDs location: LEDs are located on the PCB, visible via holes in the metal
bracket holder
Connectors: (2) Shielded RJ-45
Table A-5 Fiber-optic Board Gigabit Ethernet General Technical Specifications
Specification Description
Interface Standard: PCI Express Base Specification Revision 1.0
Board Size: Low profile Short PCI Add in card 167.74mm X 63.5 mm (6.6"
X 2.5")
Table A-3 Copper Board Gigabit Ethernet General Technical Specifications
Specification Description