User`s guide

22 007-5472-001
A: Specifications
Table A-2 summarizes the physical and performance characteristics for the fiber-optic
board.
General Technical Specifications
This section describes general technical specifications for the copper board and
fiber-optic board.
Copper Board Technical Specifications
Table A-3 provides the general technical specifications the copper boards.
Table A-2 Fiber-Optic Gigabit Ethernet Tech Specs. - (1000Base-SX) Adapters
Characteristic Value
IEEE Standard / Network
topology:
Fiber Gigabit Ethernet, 1000Base-SX (850nM)
Data Transfer Rate: 2000Mbit/s in full duplex mode per port
Cables and Operating distance: Multimode fiber:
220m at 62.5 um
550m at 50 um
Optical Output Power: Typical: -6 dBm
Minimum: -9.5 dBm
Optical Receive Sensitivity: Typical: -21 dBm
Maximum: -17 dBm
Table A-3 Copper Board Gigabit Ethernet General Technical Specifications
Specification Description
Interface Standard: PCI Express Base Specification Revision 1.0
Board Size: Low profile Short PCI Add in card 167.74mm X 63.5 mm (6.6"
X 2.5")