User`s guide

007-5472-001 21
Appendix A
A. Specifications
This appendix provides the following information:
• “Physical and Performance Characteristics” on page 21
• “General Technical Specifications” on page 22
Physical and Performance Characteristics
Table A-1 summarizes the physical and performance characteristics for the copper board.
Table A-1 Copper Gigabit Ethernet Tech. Specs. - (1000Base-T) Adapters
Characteristic Value
IEEE Standard / Network
topology:
Gigabit Ethernet, 1000Base-T
Fast Ethernet, 100Base-TX
Ethernet, 10Base-T
Full duplex / Simplex Supports both Simplex & Full duplex operation in all
operating speeds
Auto negotiation: Auto-negotiation between Full duplex and simplex
operations and between 10Mb/s and 100Mb/s speeds and
duplex 1000Mb/s speeds.
Data Transfer Rate: 1000 Mbit/s, 100 Mbit/s, and 10 Mbits/sec in simplex mode
per port.
2000Mbit/s 200 and 20 Mbit/s in full duplex mode per port.
Cables and Operating distance 10Base-T Category 3, 4, or 5 maximum 100m
100Base-Tx Category 5 maximum 100m
1000Base-T Category 5E maximum 100m