User`s guide

Switch Connect and IP Address
007-5474-003 19
Web or Telnet Access to Maintenance Port on the Gigabit Ethernet Switch
Your switch(s) setup is configured in the factory before shipment and should be accessible via
telnet or a web browser. The switch can be a single switch or a stacked master/slave combination.
You can connect to a console directly from the head node through the administration network
using telnet.
To access the switch via telnet:
telnet 10.0.20.1
Login as the administrator:
login admin
passwd: admin
Web access would be:
http://10.0.20.1
Web or Telnet Access to the Compute-Traffic Gigabit Ethernet Switch
The SMC Gigabit Ethernet switch is configured with the IP address shown below when used with
a NAS/SAN option or message passing interface (MPI) traffic. The switch can be a single switch
or a stacked master/slave combination.
To access the switch via telnet:
telnet 172.16.20.1
Login as the administrator:
login admin
passwd: admin
Web access would be:
http://172.16.20.1