User`s guide

Adapter Features
007-5476-001 3
There are two versions of the SGI 10-Gigabit Ethernet Adapter II, as described in
Table 1-1.
Table 1-2 lists the product features of the adapter.
Table 1-1 Two Versions of the SGI 10-Gigabit Ethernet Adapter II
Part Number Marketing Code Description
030-2313-001 PCIE-10G-C-RDMA The CX4 version of the adapter
030-2314-001 PCIE-10G-OR-RDMA Standard version
Table 1-2 Adapter Features
Feature Description/Specifications
Host Interface + PCI Express 1.1 x8, x4, x2, x1
+ MSI-X, MSI and support for legacy pin interrupts
Network Interfaces + 10GBASE-SR short-reach optics (850nm)
+ 10GBASE-CX short-reach copper
Ethernet + IEEE 802.3ae (10GbE)
+ IEEE 802.1p Priority and 802.1Q VLAN tagging
+ IEEE 802.3x flow control
+ IEEE 802.3ad load-balancing and failover
+ Ether II and 802.3 encapsulated frames
+ Multiple MAC addresses per interface
+ Jumbo Frames up to 9.6Kbytes
Stateless Offloads + TCP checksum offload for IPv4 & IPv6
+ TCP segmentation offload (TSO) for IPv4 & IPv6
+ Large send offload (LSO) for IPv4 & IPv6
+ Large receive offload (LRO) for IPv4 & IPv6
+ UDP checksum offload for IPv4 & IPv6
+ Receive-side scaling and packet steering
+ Line-rate packet filtering and attack protection
Integrated Traffic Manager + Multiple Tx & Rx queues with QoS
+Two separate channels for simultaneous low latency & high
bandwidth
+ Per-connection and per-class rate control
+ Packet loss avoidance
Virtualization and Firewall Rule-based packet steering and filtering capability