User`s guide

SGI
®
Altix
®
XE210 User’s Guide 81
BIOS Default Settings
The following tables show the factory-configured BIOS settings for the SGI Altix XE210
and the SGI Altix XE240 systems. The settings shown in these tables reflect BIOS74.
Note: Most system configurations use the settings shown in the “Standard Settings” column.
However, certain settings differ from the standard settings for Altix XE240 systems with
active backplanes and for Altix XE210 systems with passive or active backplanes. These
setting differences are shown in the “XE240 Active” column and the “XE210” column of
each table. Where XE210 values differ for active and passive backplanes, the values are
annotated with “active” or “passive” as appropriate.
<F10> Save and Exit - Pressing <F10> causes the following message to
appear:
Setup Confirmation
Save Configuration changes and exit now?
[Yes] [No]
If "Yes" is selected and the <Enter> key is pressed, all changes are
saved and Setup is exited. If "No" is selected and the <Enter> key is
pressed, or the <Esc> key is pressed, the user is returned to where they
were before <F10> was pressed without affecting any existing values.
Table 4. Setup Menu Key Use (Cont’d)
Key to Press Description
Table 5. Settings on the Main Screen
Option Standard Settings
Differences
XE240 Active XE210
Quiet Boot
Enable
Disable Disable
POST Error Pause
Disable
System Date
date
System Time
time
time (GMT) time (GMT)