User`s guide

68 SGI

Altix

XE210 User’s Guide

5. Remove the PCI riser assembly. For instructions, see “Removing the PCI Riser

Assembly”.

6. Remove the six screws from the server board (see letter “A”) and lift the server

board from the server system (see letter “B”).

Figure 51. Removing the Server Board

7. Replace the server board. For instructions, see “Installing the Server Board”.

8. Install the PCI riser assembly. For instructions, see “Installing the PCI Riser

Assembly”.

9. Install the processor air duct. For instructions, see “Installing the Processor Air

Duct”.

10. Install the server system cover. For instructions, see “Installing the System Cover”.

11. Plug all peripheral devices and the AC power cable(s) into the server.